Cisco – Session Logging with Hyperterminal
Posted by Josh on Sun 22 Apr 2007Categories: Cisco , Cisco Routers - [3] Comments
This tutorial is for those of you who are not a cisco engineer, but are working with a cisco engineer to resolve an issue. No matter what you are working on, they will always ask for the output of a ‘show’ command or a ‘debug’ command.
This tutorial is also for engineers that are tired of trying to explain capturing router output with hyperterminal.
Click Image to play tutorial:
May 27th, 2007 at 7:30 am
[...] Cisco – Session Logging with Hyperterminal [...]
March 14th, 2008 at 8:56 pm
Dear Sirr,
I have a quick question on your tutorial. In it, you seem to skip the part on integrating Hyper Terminal to dynamips. I was trying to do like you did in the video, but I can not get Hyper Terminal to work.
Thanks
March 15th, 2008 at 12:23 am
Depress,
This tutorial was not supposed to show you how to use hyperterminal with dynamips. I don’t have one for hyperterminal but here are a couple tutorials for using putty with Dynagen and GNS3.
http://www.blindhog.net/dynagen-using-putty-for-console-access/
http://www.blindhog.net/gns3-how-to-use-putty-for-console-access/
Josh