Comments on: GNS3 – How to build an Internet Lab http://www.blindhog.net/gns3-how-to-build-an-internet-lab/ Tips and Video Tutorials - Cisco .:. Linux .:. VOIP Mon, 08 Mar 2010 05:48:00 +0000 http://wordpress.org/?v=2.9 hourly 1 By: Josh http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-33208 Josh Mon, 25 Jan 2010 05:54:34 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-33208 Khaled, If you are using linux - Open a terminal window and type 'top' to see the cpu utilization. If you are using windows - Look at the Task Manager. Josh Khaled,

If you are using linux – Open a terminal window and type ‘top’ to see the cpu utilization.
If you are using windows – Look at the Task Manager.

Josh

]]> By: Khaled http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-33203 Khaled Sun, 24 Jan 2010 08:20:50 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-33203 hi there, Can anyone help me to add a serial interface for my 1700 and 2600 routers? In fact after I choice my routers and click on the add link button to connect between the two routers by chosing the serial interface,I get this message (no interface available. Many thanks for all of you. hi there,

Can anyone help me to add a serial interface for my 1700 and 2600 routers? In fact after I choice my routers and click on the add link button to connect between the two routers by chosing the serial interface,I get this message (no interface available.

Many thanks for all of you.

]]> By: Khaled http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-33202 Khaled Sun, 24 Jan 2010 06:48:59 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-33202 hi, to josh or anyone who knows the answer, Actually I have set my idlepc value, however I could not see the cpu utilization window when I applyed my idlepc values. many thanks to everybody hi,

to josh or anyone who knows the answer,

Actually I have set my idlepc value, however I could not see the cpu utilization window when I applyed my idlepc values.

many thanks to everybody

]]> By: Sonada http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-33151 Sonada Wed, 13 Jan 2010 00:36:16 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-33151 I THANK´S. I THANK´S.

]]> By: usman http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-33071 usman Tue, 22 Dec 2009 01:17:23 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-33071 hey, i am new to GNS and preparing for CCNP routing exam, i am facing problem with idlepc thing, if i use only one router and set idlepc value, it works fine but when i try to connect 4 routers of same series, it doesn't. i want to ask, do i need to configure idlepc value on every router or what? kindly explain because when i run 4 routers, my CPU usage boost to 100%.... hey, i am new to GNS and preparing for CCNP routing exam, i am facing problem with idlepc thing, if i use only one router and set idlepc value, it works fine but when i try to connect 4 routers of same series, it doesn’t. i want to ask, do i need to configure idlepc value on every router or what? kindly explain because when i run 4 routers, my CPU usage boost to 100%….

]]> By: Tommy http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-32736 Tommy Thu, 08 Oct 2009 05:15:24 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-32736 in your video, i found button called "emulation mode" , on my GNS3, i dont'see that button. what do i do? in your video, i found button called “emulation mode” , on my GNS3, i dont’see that button. what do i do?

]]> By: priya http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-32726 priya Tue, 06 Oct 2009 06:13:05 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-32726 Hi All, I would like to know how to configure and add Router and L2, L3, MLS Switch. Hi All,

I would like to know how to configure and add Router and L2, L3, MLS Switch.

]]> By: Subhash http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-32648 Subhash Thu, 10 Sep 2009 11:57:21 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-32648 Hi All, I would like to know how to configure the GNS3 Router to connect to the internet, so that the vmware virtual pcs can access the internet via the GNS3 router. My host operating system connects to the internet either through a proxy server or through my data card connection. currently my diagram is R0 => SW0 => C0(vmware pc-ubuntu) Please suggest Thanks, Subhash Hi All,

I would like to know how to configure the GNS3 Router to connect to the internet, so that the vmware virtual pcs can access the internet via the GNS3 router.

My host operating system connects to the internet either through a proxy server or through my data card connection.

currently my diagram is
R0 => SW0 => C0(vmware pc-ubuntu)

Please suggest

Thanks,

Subhash

]]> By: Ahmed http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-32644 Ahmed Mon, 07 Sep 2009 17:51:08 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-32644 Hi, I am currently studying for CCNA exam and I am just wondering if there is a way I can learn to do labs for CCNA. I was hoping to find some videos here. If gns3 is used that would be great. Thanks Hi,

I am currently studying for CCNA exam and I am just wondering if there is a way I can learn to do labs for CCNA. I was hoping to find some videos here. If gns3 is used that would be great.

Thanks

]]> By: Instalação do GNS3 = Dynamips + Dynagen + GUI | Cisco CCNA || Guia de Estudo http://www.blindhog.net/gns3-how-to-build-an-internet-lab/comment-page-2/#comment-32523 Instalação do GNS3 = Dynamips + Dynagen + GUI | Cisco CCNA || Guia de Estudo Wed, 29 Jul 2009 15:59:55 +0000 http://www.blindhog.net/gns3-how-to-build-an-internet-lab/#comment-32523 [...] http://www.blindhog.net/gns3-how-to-build-an-internet-lab/ [...] [...] http://www.blindhog.net/gns3-how-to-build-an-internet-lab/ [...]

]]>