Comments on: How to run multiple IP Blue phones on a single PC

By: Parth

Parth — Sun, 13 Nov 2011 03:52:26 +0000

I am using call manager 7.0 on VMWare workstation, when i tried to register softphone with call mamanger it prompt me to enter IP add. of call manager but i cant add IP add. of call maanger into softphone setting>Primary callmanager as that option is not highlighted. how to solve this.

please suggest.
Thanks

By: Mohamed Saad

Mohamed Saad — Thu, 20 Oct 2011 17:38:32 +0000

It is wonderful but I face strange problem
phones get no’s and work normally but they take the same IP address ????
I have 4 loopbacks each with a different mac and IP ??
any help with that >>>>
e.mohamed.saad@gmail.com

By: Jamesd

Jamesd — Mon, 11 Jul 2011 17:45:13 +0000

How to connect IP Blue over VPN Connection ,the CallManager IP address entry is disabled.

I am running the demo version.

By: blindhog.net » Install Cisco IP Communicator on Win7 in VMware

blindhog.net » Install Cisco IP Communicator on Win7 in VMware — Tue, 21 Jun 2011 07:16:42 +0000

[...] dialing capabilities. Unfortunately, CIPC will still only allow one instance to run at a time…unlike IP Blue. I have tested this with VMWare ESXi but it may also work with other VMWare products. [...]

By: michael

michael — Tue, 10 May 2011 07:32:56 +0000

Hi,

it is normal when i have more than 8 MAC address on my pc IPBlue does not want to stard he said “Softphone cannot seem to find a network connection or it is disabled”

By: Some hints from my second proctorlabs session. | CCIECarl

Some hints from my second proctorlabs session. | CCIECarl — Mon, 20 Dec 2010 15:28:45 +0000

[...] softphone clients pre-installed, and test running multiple instances with different configs. (great article on blindhog.net for doing [...]

By: xzyan

xzyan — Thu, 28 Oct 2010 20:32:08 +0000

Josh
I found this on cisco website

Configure the Cisco ATA 186 with the IP Address of the Cisco CallManager
Use this procedure to configure the Cisco ATA 186 with the IP address of the Cisco CallManager.

1.Verify the IP address of the Cisco ATA 186.

a.Go off-hook on the phone attached to the ATA 186.

b.Click the red button on top of the ATA 186.

c.You should hear interactive voice response (IVR) playing the configuration menu.

d.From the dialpad of the phone, press 80#.

e.You should hear the IVR playing the IP address of the ATA 186.

2.Once you know the IP address of the Cisco ATA 186, you can connect to it with a web browser at http://IP address of the ATA 186/dev (for example: http//172.16.1.2/dev).
===========================================

When I press the 80# I get IVR saying
67.1
03.1
36.1
8

does look to me like an Ip address

By: xzyan

xzyan — Thu, 28 Oct 2010 20:15:07 +0000

Josh sorry not responding to u on time. day job taking all my time. I have a mac of 00131a591a75 on the phone config. I took that one from cisco35050 port. its says on the config t product cisco ATA 186. how do I know if the ATA is registered in CallManager ? Ty Sir

By: Josh

Josh — Wed, 27 Oct 2010 04:47:07 +0000

Xzyan,

Is the ATA registered to the Call Manager?

Josh

By: xzyan

xzyan — Tue, 26 Oct 2010 19:41:25 +0000

Josh

Thank you and I appreciate you taking time to help us, I have one question today and I am sure I will have more after , I installed CM7 on vmware on window 7, I aslo installed ipblue and Cipc on my Hp laptop. I do have and ATA that is connected to 3550 switch fa0/1. I can see it up/up on the router. When I do show mac-address-table I see Mac address of 0013.1a59.1a75, when I added new device ATA 186. I went to device –> phone and cliked find . I see 3 phones.
ATA——-> ANALOG
IPBLUE —> LOOPBACK
IPBLUE —> NIC INTERFACE

I am able to make calls b/w Ipblue phones. I am not able to reach the analog phone.